Somewhere over the North Atlantic, your pilots are watching a point that doesn’t exist on any chart, with no beacon, waypoint, or buoy below it. It’s the Equal Time Point, or ETP, and it marks where the choice between two diversion airports flips, which makes it one of the most useful reference points on the flight plan.
Most private jet passengers never hear the term, though it explains why a crew picks one route over another and why the fuel load looks higher than the distance suggests. It also explains why a planner in an office thousands of miles away has already worked through an emergency before you board.

What the Equal Time Point Actually Is
Picture a line between your departure airport and your destination. Somewhere along it, an emergency would leave you equally far, in minutes rather than miles, from two alternate airports, one behind you and one ahead. That spot is the ETP.
Before the ETP, turning back is faster, and after it, continuing to the forward alternate wins. Planners don’t calculate just one. Each scenario (depressurization, engine failure, a medical event) produces its own ETP, and a long route can have several, each tied to a different pair of airports.
Think of the ETP as a decision aid, not a destination. It helps the crew choose an alternate quickly, while the actual decision still depends on weather, airport status, and the nature of the problem.
Measuring in time matters because wind rules everything over the ocean. A 100-knot jet stream tailwind can pull the ETP well away from the geographic midpoint. The planning software accounts for it, and the crew checks it again in flight as winds change.
Two Scenarios That Shape Every Oceanic Route
Planners build ETPs around the failures that hurt the most, and two stand out.
Cabin Depressurization
If the cabin loses pressure, the crew dons oxygen and begins an emergency descent, typically to 10,000 feet or the minimum safe altitude for the terrain below, whichever is higher. That caveat matters over mountainous terrain and in polar regions, where a flat 10,000-foot figure would be wrong. At low altitude the jet burns far more fuel and flies slower. Passenger oxygen supply is also limited on some aircraft, so the diversion has to happen promptly. The ETP for this case assumes the descent profile, the sharply higher fuel burn, and the oxygen duration. If you’re curious how normal pressurization works, the piece on the science of cabin pressure covers the basics.
Single-Engine Drift-Down
Lose one engine at cruise and the jet can’t hold altitude, so it drifts down to a lower level where one engine can sustain flight. That level is commonly somewhere between roughly 15,000 and 25,000 feet, depending on aircraft, weight, and temperature. Speed drops and fuel burn per mile climbs. The resulting ETP shifts relative to the depressurization one, because the slower single-engine speed changes the time to each alternate and the wind at the lower altitude differs.
Planners work through each scenario and build the fuel plan around whichever is most demanding, which often means extra fuel carried the entire way.

Why Your Fuel Load Looks Heavy
This is where ETP reaches your wallet and your payload. The fuel plan must cover the most demanding scenario under the operator’s approved procedures, meaning enough to reach the divert airport from the critical point, plus reserves. That can exceed what a normal flight would need.
It also connects to how far the jet can truly fly with passengers and bags aboard. Published range is only a starting point, and oceanic contingency fuel is one reason why.
- Divert airport selection: Runway length, weather, fuel, customs, and rescue services all count, and a field that’s technically open may not be usable.
- Route choice: A track that hugs more airports may beat a shorter one with few options.
- Weather at alternates: If conditions at Keflavik or Shannon dip, the plan changes before departure.
- Fuel and payload: Extra contingency fuel can mean fewer bags or passengers on the heaviest legs.
The Crew Behind the Crew
The pilots aren’t doing this alone. Flight planners or dispatchers, at the operator or at a third-party trip-support company, build the plan, check alternate airports, and monitor the flight. Many private operators, especially under Part 91, have no certificated dispatchers at all and rely on planners or outside support instead. The captain holds final authority, as explained in this look at who has the final say, but the planner is a second set of eyes.
A good planner earns their keep on the quiet days. If Keflavik closes for snow the night before departure, the planner who already has a second option in hand is the one you want.
In flight, the crew updates winds, reviews the next ETP, and briefs the plan. It’s routine, because they’d rather talk it through a hundred times than need it once.

Polar and Remote Routes Raise the Stakes
Over the pole or across the remote Pacific, suitable alternates thin out. On Pacific routes the options may come down to places like Anchorage or Honolulu, and on polar routes some alternates are small fields with limited services. Cold weather can also affect fuel and equipment, and rescue response takes longer.
Twin-engine jets on long overwater legs bring up ETOPS, short for Extended-range Twin-engine Operational Performance Standards. Formal ETOPS approval applies mainly to airline and some commercial operations. Private operators flying twins over water usually follow similar diversion-time thinking, and Part 135 or international operators may face their own requirements. Operators flying these routes rely on well-trained crews and proven aircraft, and ultra-long-range types like the Gulfstream G650 and Bombardier Global 7500 are built for this work.
What It Means If You Charter
If you book charter flights across an ocean, ask your operator how they handle oceanic flight planning, since good ones answer easily. Look for the following:
- A dedicated flight planning team or trusted trip-support partner.
- Crews with current oceanic and international experience.
- Clear communication about fuel stops and payload limits.
Operators work within different rules depending on how a flight is run, and Part 91 and Part 135 requirements shape what’s expected of them.
A Crossing on Paper
This planning is one reason a seven-hour crossing feels uneventful. On a New York to London trip, for example, the crew might pair Gander behind the aircraft with Shannon or Keflavik ahead, then recheck the ETP against the winds actually found over mid-ocean.

